Understand The Marvelous Process Of Making Rare Earth Magnets

December 14, 2015/0 Comments

Rare earth magnets developed in ‘70s and ‘80s are the strongest permanent magnet made from earth alloys.

Different kinds of rare magnets -

  1. Neodymium magnet – has highest magnetic properties in comparison to other magnetic alloys. This kind is applied in high strength applications but if exposed to temperatures over 150° C, it gets demagnetized.
  2. Samarium-cobalt magnet – is used in high temperature applications, but is not strong like neodymium. It is capable to endure temperatures up to 300°C
  3. Ceramic magnet – are made from iron oxide and strontium ferrite blended in a ceramic base. These magnets are very hard and brittle. They resist demagnetization and corrosion. The main advantage is that it is very inexpensive.
  4. Alnico magnet – comprises of aluminum, cobalt, and nickel. If struck or dropped this material loses its magnetic properties but can endure high temperatures up to 550°.

US neodymium magnet are the strong kind of lasting magnet commercially available in the market. They have replaced many kinds of magnets. Today, they are used in myriads of applications like hard disk drives, cordless tool motors, magnetic fasteners, MRI, electric motors, electric generators, and more.

The rare factor related to this magnet is its potent force field, which can attract power 1000 times more than its weight. Rare earth magnets differ in quality. The strength of end product depends on the kind of rare earth used and the manufacturing process.

Neodymium magnets unparalleled strength is possible because of highly developed and subtle arrangement of electronic elements and the rotation of their electron. The process of making neodymium magnet is a technological marvel.

Understand The Marvelous Process Of Making Rare Earth Magnets

Manufacturing process of rare earth magnets

License is needed to produce rare earth magnets, especially neodymium ones.


Rare earth elements like Praseodymium and Neodymium available from the earth are ferromagnetic. It means they can be magnetized permanently like iron, when mixed with transition metals like iron, cobalt, and nickel, which come from the earth.

Grinding & mixing the alloy

Rare earth elements are alloyed with ferromagnetic materials in different proportion. The necessary materials are grinded in powder form and mixed in variety of proportions to create a new material with a range of magnetic properties. Some magnets are strong, while others are more durable or can endure high temperature.

Pressing or compacting the powder

The mixtures is placed in cavity tool then compressed

Particle alignment

Just before compressing, alignment field is employed to optimize the ferromagnetic mix for magnetization.


After the pressed parts are aligned they are loaded inside a vacuum sintering kiln that locks the materials firmly in place.

Milling & cutting

After sintering the large block magnets are further refined by milling, grinding, and cutting into small, smooth pieces.

Plating or coating

After attaining the final shape, the magnet has to be coated for protection from corrosion, especially neodymium magnets.

Charging and magnetizing

After the processes of sintering and plating the magnet needs charging to generate an exterior magnetic field. Neodymium magnets only get magnetized in direction they were arranged for in alignment phase


Comments are closed.